Geogrid China: Biaxial, Uniaxial and Fiberglass Geogrid
Most of the geogrid sold under the label “China geogrid” comes from a trading desk, not from the line that made the roll. We run our own steel-plastic and fiberglass lines in Tai'an, Shandong, and this page is the plain version of what comes off them — four product families, the real tensile grades, the standards we test against, and the numbers that decide your quote.
Start with the product that matches your job, not the biggest box. Biaxial for road base and soft soil, uniaxial for walls and steep slopes, fiberglass when the problem is reflective cracking in asphalt. Every grade below is tested to ASTM D6637 or the Chinese equivalent, and the price range is what the market actually pays at the volume you would order.
Four geogrid families, one factory
Same plant, same test lab, four very different jobs. Prices are reference ranges per square metre — the final figure depends on grade, aperture, roll width and order volume.
Steel-Plastic Biaxial Geogrid
High-strength biaxial geogrid rolls combining steel wire and HDPE coating for road base reinforcement and soft soil stabilization.
USD 0.90 – 3.00/ Reference price
View product →
Steel-Plastic Uniaxial Geogrid
Uniaxial geogrid rolls from 50 to 160 kN/m in one direction for retaining walls, steep slopes and embankment reinforcement.
USD 1.00 – 3.20/ Reference price
View product →
Fiberglass Geogrid
Bitumen-coated fiberglass geogrid rolls for asphalt reinforcement and reflective crack control, supplied to project width.
USD 0.50 – 1.50/ Reference price
View product →
Self-Adhesive Fiberglass Geogrid
Pressure-sensitive self-adhesive fiberglass geogrid for fast, reliable asphalt reinforcement installation.
USD 0.80 – 2.00/ Reference price
View product →Compare the four grades side by side
These are the numbers that get argued about in design review. Match the standard named on your drawing against the last column before you order.
| Product | Type | Tensile strength | Mesh / aperture | Roll width | Standard | Reference price |
|---|---|---|---|---|---|---|
| Steel-Plastic Biaxial Geogrid | Steel-plastic, HDPE coated | 30–150 kN/m | 12.7 / 25.4 / 38.1 mm | 1.0–3.0 m, custom widths | ASTM D6637, GB/T 19274 | USD 0.90 – 3.00 |
| Steel-Plastic Uniaxial Geogrid | Steel-plastic, HDPE coated | 50–300 kN/m | Custom, 100 mm and above | 1.0–2.0 m | ASTM D6637, GB/T 19274 | USD 1.00 – 3.20 |
| Fiberglass Geogrid | Fiberglass, bitumen or polymer coated | 30–100 kN/m, elongation ≤ 4% | 12.7 / 25.4 mm | 1.0–2.0 m | ASTM D6637, JTG E50 | USD 0.50 – 1.50 |
| Self-Adhesive Fiberglass Geogrid | Fiberglass with pressure-sensitive backing | 30–80 kN/m, elongation ≤ 4% | 12.7 / 25.4 mm | 1.0–2.0 m | ASTM D6637, JTG E50 | USD 0.80 – 2.00 |
Which grade belongs in your design
Six jobs we are asked about most, and the answer we give. If your application is not here, tell us the design load and we will work it back to a grade.
| Application | Use this | Why |
|---|---|---|
| Road base and subgrade reinforcement | Biaxial steel-plastic geogrid | Strength in two directions spreads load into the aggregate instead of rutting under the wheel path. |
| MSE retaining walls and steep slopes | Uniaxial steel-plastic geogrid | One-direction strength from 50 to 300 kN/m, with the creep resistance a long-term load needs. |
| Asphalt overlay and reflective cracking | Fiberglass geogrid | High modulus and elongation under 4%, so the grid arrests the crack before it reaches the surface. |
| Soft soil foundation treatment | Biaxial geogrid with wide aperture | Larger cells lock into the fill and bridge the weak layer without pumping. |
| Bridge decks and waterproofing | Fiberglass geogrid | Bitumen or polymer coating bonds into both the asphalt and the membrane layer. |
| Municipal road repair and patching | Self-adhesive fiberglass geogrid | Pressure-sensitive backing cuts tack coat use and speeds up overnight work. |
27 guides, data sheets and design notes
Everything we have published on geogrid selection, installation and specification. These are the pages our technical team sends to engineers who need the reasoning, not just the product.
Fiberglass Geogrid China Supplier: Mesh and Coat
How to vet a fiberglass geogrid China supplier: mesh size, bitumen vs polymer coating, and the rib-count arithmetic that proves a 30-100 kN/m datasheet.
October 28, 2026
Woven Geotextile China Manufacturer: Slit Film
A woven geotextile China manufacturer explains slit film tapes, the grab-versus-wide-width trap, and how roll width changes the area you pay for.
October 27, 2026
HDPE Geomembrane Welding China: Seam QC Checklist
HDPE geomembrane welding in China: dual-track vs extrusion, lap and seam-length arithmetic, sample frequency, and the defects that actually leak.
October 24, 2026
Self Adhesive Geogrid China Price: Roll Spec
Self adhesive geogrid China price explained: what the adhesive adds, why the range stops at 30–80 kN/m, and how roll width changes the area you pay for.
October 23, 2026
Geogrid HS Code China: Duty, Class and Documents
The right geogrid HS code follows the material, not the name. A China source factory sorts steel-plastic vs fiberglass geogrid; run the duty math early.
October 22, 2026
Geogrid for Container Yards: Base and Load Guide
Geogrid for container yard pavements: how stack loads and RTG wheel pressure size the base, which biaxial grade to use, and what to check before you order.
October 20, 2026
Geogrid for Railway Subgrade: Ballast Layer Specs
Specify geogrid for railway subgrade work: aperture against ballast D50, design strength after reduction factors, and grades from a China source factory.
October 19, 2026
Biaxial Geogrid for Wind Farm Roads and Crane Pads
Wind farm roads and crane pads put brutal single loads on weak soils. Here is how to spec biaxial geogrid, run a bearing check and cut stone cost.
October 18, 2026
China Geosynthetics Export Catalog: Products and Specs
China geosynthetics export catalog: the full range of geogrid, geotextile, geomembrane and geocell lines, with real specs, MOQ and port details.
October 13, 2026
Geogrid China: How to Vet a Source Factory Direct
Buying geogrid from China? Learn how to vet a source factory direct — verify extrusion lines, ISO 10319 tensile reports and MOQ — and skip trading-company markup.
October 12, 2026
Custom Size Geosynthetics: Roll Width and Cutting Guide
Specify custom size geosynthetics the right way: roll width and length by product, a lap and cutting-waste calculation, and the sizing checks buyers miss.
October 9, 2026
Geogrid for Mining Haul Roads: Design and Spec Guide
Specify a geogrid for mining haul roads by real tensile grade, aperture and roll size against subgrade CBR, with a worked base thickness check.
October 5, 2026
Geogrid Specification: Aperture Size and Tensile Strength
How to read a geogrid specification: match aperture size to aggregate gradation and tensile strength to design load, with the numbers that matter.
October 3, 2026
Geogrid for a Driveway: Specification Guide for Contractors
How to specify a geogrid driveway section that survives delivery trucks and refuse lorries: driveway classes by design vehicle, biaxial grade selection, aperture match, separator pairing and the construction sequence that protects the design.
October 1, 2026
Geogrid vs Geotextile: What Is the Difference
Geogrid reinforces, geotextile filters and separates. A clear comparison of function, key specifications and the sections where a project needs both — with driveway, wall and drainage selection scenarios.
October 1, 2026
Geogrid Price per Square Meter in 2026: What Drives the Cost
Indicative 2026 geogrid prices per square meter for biaxial, uniaxial and fiberglass grids, the six factors that move the number, and the five details a factory needs to quote your project.
October 1, 2026
Geogrid Aggregate Thickness Savings: Design Guide
See how geogrid aggregate thickness savings actually work: confinement, load spread and real design numbers that cut base course depth and pavement cost.
September 30, 2026
Geogrid for Retaining Walls: Design and Slope Checklist
Use this checklist to spec geogrid for retaining walls and steep slopes: fill quality, spacing, connection, drainage, embedment and global stability.
September 29, 2026
Fiberglass Geogrid: How to Stop Reflective Cracking
See how a fiberglass geogrid interlayer stops reflective cracking in asphalt overlays, with placement, tack coat and specification guidance explained.
September 27, 2026
Steel-Plastic Geogrid Data Sheet: How to Read It Right
Learn how to read a steel-plastic geogrid data sheet: tensile strength, elongation, aperture size and creep — plus typical values for comparing offers.
September 25, 2026
Biaxial Geogrid for Road Base Reinforcement: Design Guide
Biaxial geogrid turns a weak subgrade into a load-bearing base. Learn the design inputs, specification values and installation rules that matter.
September 24, 2026
Biaxial vs Uniaxial Geogrid: Which Direction Do You Need?
Biaxial and uniaxial geogrids transfer load in different directions. Learn how each works, where each belongs, and how to specify the right geogrid.
September 23, 2026
Steel-Plastic Geogrid vs Fiberglass Geogrid: Which One Do You Need?
A practical comparison of steel-plastic and fiberglass geogrids covering strength, applications, cost, and durability to help engineers choose the right product.
August 28, 2026
How to Install Geogrid for Road Base Reinforcement: Step-by-Step Guide
A complete step-by-step installation guide for geogrid in road base reinforcement, covering preparation, placement, overlap, and compaction best practices.
August 25, 2026
5 Benefits of Fiberglass Geogrid in Asphalt Pavement Reinforcement
Discover the top five benefits of using fiberglass geogrid in asphalt pavement, from preventing reflective cracking to extending pavement service life.
August 20, 2026
Geogrid for Soft Soil Stabilization: Engineering the Foundation
Learn how geogrid reinforcement stabilizes weak soils, the mechanics of interlock, and design considerations for soft ground construction.
August 15, 2026
How to Choose a Reliable Geogrid Supplier in China
Practical tips for sourcing geogrid from China — what to check on quality, certifications, factory capability, and communication to avoid costly mistakes.
August 10, 2026
Tell us the job, get the specification
Send us the application, the design load and the roll width you need. We will come back with the grade, the standard, the lead time and a price — no catalogue round-up, and nothing you cannot defend to your own engineer.